December Page 1

I used semi-gloss white, you really bring out any rough spots when you start painting. I had to sand and wet sand to get a good finish.
Cabin roof on port side glued in place
Port cabin roof and ports. 
Bow before taping and adding enclosure deck 
Bow taped and ready for deck
Port cabin forward

If you noticed lots of paper towels everywhere that because I have come up with a system for reusing them. When I use one to clean epoxy drips or runs I ball it up and lay it down to dry.  When the small amount of epoxy dries I reuse it several more times.  


Port cabin area

December Page 1

Page  Two  of December Log 

Back to Building Log    Home